Changes between Version 7 and Version 8 of CarPC/Hardware


Ignore:
Timestamp:
09/09/10 22:03:56 (14 years ago)
Author:
art
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • CarPC/Hardware

    v7 v8  
    2929[[Image(http://www.tevs.eu/stuff/bmw/DSCI3153.JPG.small.jpg, 400px)]] 
    3030 
     31== Hardware from inside == 
     32On the first image you see the VoomPC-2 housing I am using to install the motherboard into. On the second image one can see the inside of that housing. In the top right corner one can see the IBus interface connected to the internal COM-Heading. The IBus signal is connected through the power-connector of the Voom housing.  
     33[[Image(http://www.tevs.eu/stuff/bmw/DSCI3186.JPG.small.jpg, 400px)]] 
     34[[Image(http://www.tevs.eu/stuff/bmw/DSCI3178.JPG.small.jpg, 400px)]] 
     35 
    3136== Installation/Mounting == 
    3237For the installation of the CarPC I choosed the place in the trunk. The CarPC was mounted using special rubber-screws as widely used in LPG (liqued propane gas) installations. This bolts allows reduces vibrations and are perfectly suited for a CarPC. Although I am using a SSD and do not have any rotary components except of the cooling fans, I think reducing the vibrations would not make it worse :)