= Welcome to '''OpenBM''' project webpage = [[TracNav(TracNav/PageTOC)]] Hi, my name is [http://www.tevs.eu Art Tevs] and I would like to present you the project named OpenBM_E39.[[BR]] OpenBM stands for: Open Source Bordmonitor. The project is mainly targeting all BMW enthusiasts, who would like to improve the standard BMW multimedia equipment with their own configurations. On this webpage, I would like to present you a device made out of the original BMW's 16:9 bordmonitor housing found mainly in E39/E38 as also X5. The device can seamlessly be included into original BMW equipment and deals as an output/input device for a CarPC. [[Image(http://www.tevs.eu/stuff/bmw/DSCI4104.JPG.small.jpg, 320px)]] [[Image(http://www.tevs.eu/stuff/bmw/IMAG0038.small.jpg, 400px)]] [[Image(http://www.tevs.eu/stuff/bmw/DSCI3178.JPG.small.jpg, 400px)]] [[Image(http://www.tevs.eu/stuff/bmw/DSCI3196.JPG.small.jpg, 400px)]] == Project Repository == You can find all available code at Github repository: [https://github.com/cgart/OpenBM OpenBM-Repository] == Project Constraints == * Original Look 16:9 Bordmonitor with a CarPC. * use Bordmonitor for Input/Output of CarPC * Being able to seamlessly connect Rearview camera as also DVB-T/DVD * Be cheap == Features == Here is a list of current features supported by the device. * 800x480 native pixel resolution * 3 Input sources, 1xVGA and 2xAV (composite video) * Full support of all buttons and encoders. Buttons support press, hold and release states * All the control LEDs can be set into any flashing state controlled by a bit pattern, i.e. 11111111 - LED on, 01010101 LED flash every 1/8sek * Support switching between video sources as also turning on and off of the display * Automatic switch to AV1/AV2 when 'R' gear is selected (reverse camera) * Original Photo-Sensor of the bordmonitor is used to change the brightness of the display * Complete emulation of MID device through OpenBM. * Supports following configurations: * BMW Professional RDS * BMW Buisiness with DSP * CD-Changer * XBMC is running as a front-end software * Plugin to control the on-board computer == Software == '''OpenBM''':[[BR]] The software used by the OpenBM device is currently not publicly available. However, you can ask me for it. I will put online several parts of it, if somebody is get interested. '''Operating System''':[[BR]] I developed a Linux daemon, which interacts between serial port (this is where BMW's i-bus will be connected later to a CarPC) and local TCP/IP stack. '''CarPC''':[[BR]] I have summarized information about used CarPC on the [wiki:CarPC/Hardware Hardware] page. As base for the CarPC I am using ZOTAC's IonITX series F board (with WLAN) housing in an VoomPC-2 enclosure. '''Main Software''': [[BR]] Main software is based on XMBC for which I wrote several plugins. The information for the software can be found on [wiki:Software/Main Main Software] page. '''Documentation''': I wrote a documentation for OpenBM as a final device. The documentation is in german, since this is the small market I am currently targeting :) [http://www.tevs.eu/stuff/bmw/openbm.pdf download here] == Timeline == The following list represents the timeline of this project. Every time there is new event, it will be published on an extra wiki-page and added to the list. So take a look on those events, already happened :) || [wiki:Software/Main 07th, September 2010] || I've added couple of screenshots showing the self-made plugins to control BMW's equipment in action :) || || [wiki:Software/Gateway 31th, August 2010] || Added information about new release of a gateway between IBus and software applications. D-Bus support is dropped.. TCP/IP is added :) || || [wiki:CarPC/Hardware 30th, August 2010] || I've updated the session about the CarPC showing images with installation. Also a frame for the radio was rebuilt, [wiki:Manufacturing/AuxIn here] you can find more impressions. || || [wiki:Software/Main 25th, August 2010] || The [wiki:CarPC/Hardware CarPC] is now in the car. I've updated the [wiki:Software/Main Main Software] section showing OpenBM + XBMC in action directly in the car. || || [wiki:Software/Main 9th, August 2010] || For my CarPC I am using the XBMC multimedia software. I am currently working on a plugin for this piece of software to control the core BMW equipment. || || [wiki:Software/GatewayDBus 20th, July 2010] || First release of IBus/D-Bus Gateway. A daemon running in the background and forwarding messages between IBus (hardware) and D-Bus (software). || || [wiki:Manufacturing/Frame 26th, June 2010] || Based on the original 4:3 frame the OpenBM housing was created. Additionally cables required for CarPC were installed. || || [wiki:Manufacturing/AuxIn 3th, June 2010] || OpenBM is just a video output device. In order to bring audio into my car, I installed an AUX-In in the BMW Professional RDS radio. || || [wiki:Progress/EmulatingMID 1st, June 2010] || First software running emulating MID device. I made a video showing the device in action. || || [wiki:Prototype/Two April 2010] || Prototype replaced by professionally etched PCB. SMD soldering and error patching was then performed by hand.|| || [wiki:Prototype/One January 2010] || First prototype of a button field controller module for the bordmonitor housing || || [wiki:Manufacturing/Display October 2009] || Put a new display into the bordmonitor housing. In this case I am using a 7!'' display with native resolution of 800x480 pixels.|| || [wiki:ReverseEngineering October 2009] || Reverse engineering of original BMW's 16:9 bordmonitor housing. Special interest goes to the both button fields as also LEDs || == Acknowledgement == At this place, I would like to thank Bengt-Olof-Swing for his helpfull comments. You can visit a thread from MP3car-forum where he shows his results on an equivalent project so far, [http://www.mp3car.com/vbulletin/hardware-development/139907-button-interface-bordmonitor-bmw-e39-e46.html click here]. ---- {{{ #!html

Pay methods

}}}