Changes between Version 12 and Version 13 of WikiStart


Ignore:
Timestamp:
07/05/10 17:03:01 (14 years ago)
Author:
art
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • WikiStart

    v12 v13  
    44OpenBM stands for: Open Source Bordmonitor. The project is mainly targeting all BMW enthusiast, who would like to improve the standard BMW multimedia equipment with their own configurations. On this webpage, I would like to present you a device made out of the original BMW's 16:9 bordmonitor housing found mainly in E39/E38 as also X5. The device can seamlessly be included into original BMW equipment and deals as an output/input device for a CarPC. 
    55 
     6[[Image(http://www.tevs.eu/stuff/bmw/IMAG0032.small.jpg, 400px)]] 
     7[[Image(http://www.tevs.eu/stuff/bmw/IMAG0038.small.jpg, 400px)]] 
    68 
    79== Project Constraints == 
    … …  
    1012 * Being able to seamlessly connect Rearview camera as also DVB-T/DVD 
    1113 * Be cheap 
     14 
     15== Features == 
     16Here is a list of current features supported by the device.  
     17 * 800x480 native pixel resolution 
     18 * 3 Input sources, 1xVGA and 2xAV (composite video) 
     19 * Full support of all buttons and encoders. Buttons support press, hold and release states 
     20 * All the control LEDs can be set into any flashing state controlled by a bit pattern, i.e. 11111111 - LED on, 01010101 LED flash every 1/8sek 
     21 * Support switching between video sources as also turning on and off of the display 
     22 * Original Photo-Sensor from the bordmonitor can be used to detect current brightness in the car (can be used to detect night or day time) 
     23 * Almost complete emulation of MID device through OpenBM. BMW Professional RDS Radio can be controlled by this device 
    1224 
    1325== Timeline == 
    … …  
    3042 
    3143 
    32 == Features == 
    33 Here is a list of current features supported by the device.  
    34  * 800x480 native pixel resolution 
    35  * 3 Input sources, 1xVGA and 2xAV (composite video) 
    36  * Full support of all buttons and encoders. Buttons support press, hold and release states 
    37  * All the control LEDs can be set into any flashing state controlled by a bit pattern, i.e. 11111111 - LED on, 01010101 LED flash every 1/8sek 
    38  * Support switching between video sources as also turning on and off of the display 
    39  * Original Photo-Sensor from the bordmonitor can be used to detect current brightness in the car (can be used to detect night or day time) 
    40  * Almost complete emulation of MID device through OpenBM. BMW Professional RDS Radio can be controlled by this device 
    41  
    42  
    43 [[Image(http://www.tevs.eu/stuff/bmw/IMAG0032.small.jpg, 400px)]] 
    44 [[Image(http://www.tevs.eu/stuff/bmw/IMAG0038.small.jpg, 400px)]] 
    45  
    4644 
    4745{{{