Changes between Version 10 and Version 11 of WikiStart

Timestamp:

07/05/10 16:51:06 (14 years ago)

Author:

art

Comment:

--

WikiStart

@@ -15 +15 @@
 The following list represents the timeline of this project. Every time there is new event, it will be published on an extra wiki-page and added to the list. So take a look on those events, already happened :)
 
-|| [wiki:17102009 17th, October 2009] || Put a new display into the bordmonitor housing. In this case I am using a 7!'' display with native resolution of 800x480 pixels.||
+|| [wiki:01062010 26th, June 2010] || Based on the original 4:3 frame the OpenBM housing was created. Additionally cables required for CarPC were installed. ||
 
-|| [wiki:01102009 1st, October 2009] || Reverse engineering of original BMW's 16:9 bordmonitor housing. Special interest goes to the both button fields as also LEDs ||
+|| [wiki:01062010 1st, June 2010] || First software running emulating MID device. I made a video showing the device in action. ||
+
+|| [wiki:01052010 Mai 2010] || Soldering done and the PCB get it final state. ||
+
+|| [wiki:01042010 April 2010] || Prototype replaced by professionally etched PCB. SMD soldering and error patching was then performed by hand.||
+
+|| [wiki:01012010 January 2010] || First prototype of a button field controller module for the bordmonitor housing ||
+
+|| [wiki:17102009 October 2009] || Put a new display into the bordmonitor housing. In this case I am using a 7!'' display with native resolution of 800x480 pixels.||
+
+|| [wiki:01102009 October 2009] || Reverse engineering of original BMW's 16:9 bordmonitor housing. Special interest goes to the both button fields as also LEDs ||
+
+
+== Features ==
+Here is a list of current features supported by the device. 
+ * 800x480 native pixel resolution
+ * 3 Input sources, 1xVGA and 2xAV (composite video)
+ * Full support of all buttons and encoders. Buttons support press, hold and release states
+ * All the control LEDs can be set into any flashing state controlled by a bit pattern, i.e. 11111111 - LED on, 01010101 LED flash every 1/8sek
+ * Support switching between video sources as also turning on and off of the display
+ * Original Photo-Sensor from the bordmonitor can be used to detect current brightness in the car (can be used to detect night or day time)
+ * Almost complete emulation of MID device through OpenBM. BMW Professional RDS Radio can be controlled by this device